Marzocchi Tools

All Marzocchi tools, which are referenced in the manuals or have seen by me. 

Front Suspension Tools

PictureReferenceITEM No.MARZ. NoLARM No.DescriptionUse
60.10Big Tool Case XC500 / XC51XC500, XC51 etc.
ITEM 10360.02Pumpall forks
REF AITEM 10460.32Plug Extraction Tool (Air Cap Puller)To remove the plug from the stanchion tube (XCR / DH3 / XC400 - 500 - 600 - 700)
REF BITEM R504360.21Pointed PliersTo remove the Oil Seal retaining Ring (XCR / DH3 / XC400 - 500 - 600 - 700)
REF BITEM 109Oil control bushing' - ??Press-In Tool XC500 (Buchse) etc.
REF BITEM 99Compensation piston (XC400)
ITEM 92Philips Screwdriver (XC400)
REF GITEM 98Tool zum Einführen der Trennbuchse (XC400)
REF CITEM 11060.19Press-In Tool XC500
REF MITEM 110Special introduction Tool XC400
ITEM 113Vorrichtung zum Einpressen in Stanchion tube (XC500) ??
REF CITEM 504760.34Tool for oil seal 26mm assembly (Press-in tool)to insert the oil seal into the slider
REF DITEM 502460.27'T' allen wrenchto unscrew stanchion tube (XCR/DH3)
REF EITEM 504860.38Protection ring to remove the oil seal from stanchion tube (XCR, DH3)
Valve Adapter vermutlich mit Rückschlagventil
60.13??[Don't know what this is for ..?]
91.025Pump - Valve Adapter?
60.33361636MAR Werkzeugschlüssel R8.001Gelenkzapfenschlüssel <= XC400, 35 - 60 mm mit Zapfen 4 mm)
2mm allen wrench XC500 only

 

Rear Suspension Tools

From what I know Marzocchi designed the following rear shock suspension devices, which heavily have been used in all the great Sintesi/Verlicchi fully frames and others from the early 90’s. 

  • Marzocchi C 25 : Air/oil multi-valve shock absorber with mechanical spring for static load
    • Pre-load spring adjustment by means of an outer ring nut
    • Several types of springs (see table) and shoulder bushings are available for customizing the shock absorber
    • Travel : C25 = 25 mm (1 inch) 
    • Wheelbase : C25 = 135 mm (5.3 inches)
    • Weight :
      • C25 : shock absorber body: 210 g (0.46 lb)
      • C25 : spring K/n 60 = 80 g (0.17 lb.) ÷ spring K/n 140 = 200 g (0.30 lb.)
         
  • Marzocchi C 35 : Air/oil multi-valve shock absorber with mechanical spring for static load
    • Pre-load spring adjustment by means of an outer ring nut
    • Several types of springs (see table) and shoulder bushings are available for customizing the shock absorber
    • Travel : C35 = 35 mm (1.37 inches) 
    • Wheelbase : C35 = 155 mm (6.1 inches)
    • Weight :
      • C35 : 220 g (0.48 lb.)
      • C35 : spring K/n 60 = 130 g (0.28 lb.) ÷ spring K/n 140 = 270 g (0.59 lb.) 
         
  • Marzocchi A 25 : Multi-valve, air/oil-sprung shock absorber.
    • Air pressure regulation by “Schraeder” valve.
    • Standard air pressure : 7 Bar (102 psi)
    • Compression damping adjustment with 2 positions : 
      • HARD ( ) lock-out for riding uphill and on even ground
      • SOFT ( ) maximum damping sensitivity 
    • Travel : 1 inches o. 25 mm
    • Wheelbase : 125 mm
    • Weight : 1 lbs. o. 440 grams
       
  • Marzocchi A00033
     
PictureReferenceMARZ. NoLARM No.DescriptionUse
REF AR 5064---Compressing Ring ToolTo adjust compression Ring
REF B---60.15Vice BlocksTo hold Piston Rod
REF CR 5055---Pressurizing ToolTo facilitate pressurizing of Compensation Champer
REF D10060.02Air Pump with GaugePressurizes Compensation Chamber
REF E9260.24Philips Head ScrewdriverTo unscrew Shock Body Screw
REF F---60.16Driver to fit Pilot Bushing on Force RodBoth to fit Pilot Bushing into and remove it from the Force Rod

 

Subscribe To My Newsletter!

Join my Mailing List to receive the latest News and Updates from Dr_Marzocchi!

You have Successfully Subscribed!

0
    0
    Your Cart
    Your cart is emptyReturn to Shop
      Calculate Shipping